UCP1A CONTACT PROBE

The UCP1A contact probe is a lightweight and versatile instrument that provides a means of carrying out underwater cathodic protection potential measurements. It has been specially designed for use with manned or Remotely Operated Vehicles (ROVs) and is supplied with 3 metres of underwater cable. When the stainless steel probe tip of the UCP1A makes contact with the surface under test, the resulting voltage can be read on a suitable high impedance or digital voltmeter.
The UCP1A is extensively used in a wide range of applications including production and drilling platforms, ships’ hulls, jetties and other marine works. UCP1A product code: H4.

FEATURES

- Hard-wearing DELRIN body
- Stainless steel probe tip
- Lightweight design / Easy to use
- Suitable for gripping in manipulator arm

TECHNICAL SPECIFICATION

Half Cell
- Type: Silver/Silver Chloride screw-in
- Accuracy: +/- 5mV when used in sea water
- Temperature coeff: + 0.2mV per °C
- Temperature range: 0 - 30 °C
- Working life: 1 to 2 years if looked after

Unit
- Designed for use with remote voltmeter
- Minimum load impedance > 10M Ohms
- Probe: Stainless Steel (316) replaceable (our ref: H14)
- Weight: 0.5Kg
- Size: 126mm x 39mm diameter
- Underwater cable: 3m long x 9mm
- Packed weight (complete): 0.8kg
- Dimensions (packed): 26cm x 14cm x 30cm

Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation.