UCP1B PROXIMITY PROBE

The UCP1B proximity probe is a lightweight and versatile instrument specifically designed to carry out underwater cathodic protection potential measurements. The probe has been developed for use with manned or Remotely Operated Vehicles (ROVs) and is supplied with 3 metres of cable. By placing the UCP1B in close proximity to the surface under test, a voltage reading can be obtained on a suitable high impedance or digital voltmeter. The meter should be connected between the probe and a separate structure negative return.
The UCP1B is extensively used in a wide range of applications including production and drilling platforms, ships’ hulls, jetties and other marine works. UCP1B product code: H5.

FEATURES

- Hard-wearing DELRIN body
- Half Cell can be replaced
- Lightweight design / Easy to use
- Suitable for gripping in manipulator arm

TECHNICAL SPECIFICATION

Half Cell
- Type: Silver/Silver Chloride screw-in
- Accuracy: +/- 5mV when used in sea water
- Temperature coeff: + 0.2mV per °C
- Temperature range: 0 - 30 °C
- Working life: 1 to 2 years if looked after

Unit
- Designed for use with remote voltmeter
- Minimum load impedance > 10M Ohms
- Probe: Stainless Steel (316) replaceable (our ref: H14)
- Weight: 0.5Kg
- Size: 126mm x 39mm diameter
- Underwater cable: 3m long x 9mm
- Packed weight (complete): 0.8kg
- Dimensions (packed): 26cm x 14cm x 30cm

Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation.